12V Black PCB RGBW LED Strip , 60LEDS / M 19W / M Addressable
Waterproof Led Strips SMD5050
12V black PCB RGBWW strip SMD5050 60LEDS/M 19W/M RGB white RGBW 24V
addressable rgbw led
1. ultra thin FPC ,ultra - flexible, can be bent as you like, can
be fixed at any irregular place.
2. 12V with 3leds can be cuttable and for 24v each 6 LEDS can be
cut and connected as you like.
3. 3M adhesive tape on backside which can be easily to install also
can be fixed at anywhere
4. DC12V with low voltage whican could be safe enough for
5. Nonwaterproof with IP20 and IP65 can be used inside or outside
IP 68 can be into water.
6. Certifications: RoHS and CE, can be exported all over the world.
|IP68||silicon tube with silicon injected|
1. LED chip —— SMD5050 R, G, B, W(WW/CW) 4 in 1 LED chip.
2. Standard Reel Length: 5meter/roll, also can be customized.
3. Cutted: you can cut this stuff pretty easily with wire cutters,
Solder to the 0.1'' copper pads and you're
good to go.
DC12V: cutted per 3LED, there are cut-lines every 5cm.DC24V: cutted
per 6LED, there are cut-lines
4. Power: the theory power is 19.2W/M, but the really power just
5. Power supply:
DC12V led strip: you must use a 12V DC power supply to power this
strip, do not use higher than 13V,
DC24V led strip: please use 24V DC power supply, or you can destroy
the entire strip.
6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;
waterproof: screw+silicon clip, or 3M adhesive back side.
8. Type: RGBW, RGBCW, RGBWW——60LEDs/m, White PCB
Non-waterproof ——DC12V; Non-waterproof——DC24V
9. Color temperature: RGBWW: RGB+3000K; RGBW: RGB+6000K; RGBCW:
Q1: What are your market reach throughout the region?
A1: Our markets around the world in every corner, we have eight
years of experience in foreign trade.
We have worked with every country buyers, producers and
distributors to reach more than 19,000.
Q2: Can I get your samples first?
A2: Yes. Samples order is welcome.
However we will charge samples cost, which will be return in your
Q3: Do you have the ability to do independent research and
A3: Our engineering department has over 20 people, we have research
and development capabilities.
We also collect regularly customers feedback, to improve products
and make new product launches.
Q4: What is the lead time for production?
A4: 3-5 days for samples, 12-15 days for mass order.
Q5: How you control your product quality?
A5: 100% of the PRODUCTS will be tested and keep lighting to test
its quality reliability,
each products should pass all our QC procedures before shipping to
Q6: What type customer is your client?
A6: Hotel projects, wholesaler, export company, supermarket, retail
chains On-line shop,
also personal home use.