Customized length RGBWW RGBW led strip four colors in one led
1) IC builted in ws2811 led flexible strip
2) Input voltage:dc5v
3) Light color: full color ,changable
4) 5 meters/roll
5) can be non waterproof and waterproof ,such as IP65,IP68
6) Power consumption:43.2w/M
7) Long lifespan: 50,000 hours
8) white or black FPCB
9) Each smd 5050 have an ws2811 IC inserted in ,more stable,each
led individually address controller
10) strip length can be cut every led
|IP68||silicon tube with silicon injected|
1. LED chip——SMD5050 R, G, B, W(WW/CW) 4 in 1 LED chip.
2. Standard Reel Length: 5meter/roll, also can be customized.
3. Cutted: you can cut this stuff pretty easily with wire cutters,
Solder to the 0.1'' copper pads and you're
good to go.
DC12V: cutted per 3LED, there are cut-lines every 5cm.DC24V: cutted
per 6LED, there are cut-lines
4. Power: the theory power is 19.2W/M, but the really power just
5. Power supply:
DC12V led strip: you must use a 12V DC power supply to power this
strip, do not use higher than 13V,
DC24V led strip: please use 24V DC power supply, or you can destroy
the entire strip.
6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;
waterproof: screw+silicon clip, or 3M adhesive back side.
8. Type: RGBW, RGBCW, RGBWW——60LEDs/m, White PCB
Non-waterproof ——DC12V; Non-waterproof——DC24V
9. Color temperature: RGBWW: RGB+3000K; RGBW: RGB+6000K; RGBCW:
1. ultra thin FPC ,ultra-flexible, can be bent as you like, can be
fixed at any irregular place.
2. Each 6 LEDS can be cut and connected as you like.
3. 3M adhesive tape on backside, easy to install. Can be fixed at
4. DC12V, safe products.
5. IP20,IP65 can be used inside ,outside ,into water.
6. Certifications: RoHS and CE, can be exported all over the world.